Solar Shades

Solar Shades for Brownsburg, IN

Keep the lake in view, lose the glare off it

Call (317) 854-7158Get Free Quote
Quick Answer

Read these before you choose a fabric. Material, mount and lift decisions constrain what fabrics make sense, and working in that order avoids falling for something that won't work in the room.

  • Service: Solar Shades for Brownsburg homeowners
  • Service area: Brownsburg, IN and surrounding areas
    • Honest structure: the measure happens on a normal appointment, the factory takes two to five weeks to build your order, and then we install. Service work on something already hanging moves much faster because nothing needs fabricating.
  • Insured and bonded
  • Serving Brownsburg, IN since 2008
Solar Shades Services

Expert Solar Shades for Brownsburg Homes

Water frontage is the recurring Brownsburg condition, and it's what solar shades are for. Ironwood, WindRidge, Summer Ridge, Arbor Springs, Fox Chase, Lake Ridge, Branches and Promenade all advertise lake or pond lots, and a water lot means an unobstructed rear elevation with no canopy between the glass and low afternoon sun. WindRidge is the sharpest version, because its lakes carry fountains rather than sitting still, and moving water throws moving reflected glare that arrives from an angle a tilting slat never quite catches. Streets here follow the Indiana section line grid, so most rear elevations sit close to a cardinal orientation and the glare arrives on schedule.

Openness factor is a tradeoff, not a feature, and anyone selling it as a feature is skipping the important half. A 10 percent openness keeps the fountain view and lets a lot of glare through. A 1 percent kills the glare and turns the lake into a gray smear. Between those, 3 and 5 percent are where most Brownsburg rooms land. None of them give you night privacy: after dark the relationship reverses and anyone outside sees in. And solar mesh slows fading rather than preventing it, since NFRC attributes only about 40 to 60 percent of fading damage to ultraviolet in the first place. Heat, visible light and humidity do the rest.

When to Call

Signs You Need Solar Shades

If you notice any of these in your Brownsburg home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

Stock shades from a box store already look wavy

You squint through a video call at two o'clock

You keep closing blinds and losing the view

The kitchen island is too bright to work at

Patio glass throws light across the whole room

Afternoon glare washes out the television

A west room is unusable from three o'clock on

The room heats up long before the thermostat notices

Furniture gets moved around to dodge the sun

Sheer curtains do nothing about direct sun

Our Process

How Brownsburg Window Treatments Handles Solar Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Glare checked at the real hour

2

Three widths and three heights

3

Roll direction and control side set

4

Light gap disclosed per opening

5

Whole elevation ordered together

Real Project Photos

Solar Shades in Brownsburg

Photographs from real solar shades jobs completed by our crew in Brownsburg and surrounding areas.

Custom shades measured and installed in Brownsburg
Scope of Work

What Solar Shades Includes

Every Brownsburg job is documented item by item. Here is what the crew covers.

Every elevation walked and written down, because a west window and a north window don't get the same openness

Openness factor chosen per opening, 1, 3, 5 or 10 percent, rather than picked once for a whole house

Samples held against the actual glare at the hour that room is actually a problem

Fabric color decided alongside openness, since dark yarns read the view and light yarns bounce more light back at you

The view you'd be giving up shown to you through a real sample before the order, not described in words

Night behavior explained plainly, because with interior lights on the shade works in the other direction

Heat expectations set honestly, including what an interior product can't do once sun is already through the glass

Fade language kept accurate, since NFRC puts UV at roughly 40 to 60 percent of fading damage

Three widths and three heights per opening plus a corner-to-corner square check

Mounting depth measured for the tube, the brackets and a cassette if the roll is being hidden

Roll direction set, with reverse roll used where the fabric needs to stand off the glass

Light gap per side disclosed, and flagged as larger on shades over 120 inches or past a 4:1 ratio

Wide sun-facing spans reviewed for coupling so two tubes track together across one opening

Chain side chosen per window, with cordless and motorized offered where a chain doesn't suit

Every continuous cord loop unit gets its tensioner anchored rather than left hanging as a loop

Layering discussed where one fabric can't handle daytime glare and nighttime privacy at the same window

Hembar matched to the fabric so an open weave hangs straight instead of waving at the bottom

Each shade run full travel on install day and checked for centered tracking before sign-off

Pricing

What Solar Shades Cost in Brownsburg

National category figures put stock shades near $60 to $600 a window and custom-fabricated shades roughly $250 to $2,600. Those are published national ranges rather than a quote for a house in Brownsburg. Solar shades sit in the middle of that band and the openness number itself barely moves the price. What moves it is the weave and the yarn: a basic vinyl-coated polyester screen costs less than a fine-yarn or a metalized-backed fabric, and width drives everything as usual. Hiding the roll in a cassette adds. Motorization is priced separately, nationally $300 to $1,500 per window installed. Brownsburg Window Treatments works from measured openings and real elevations in Hendricks County, never from an average.

By Product

How Solar Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

1 percent openness: The tightest weave we normally hang. It cuts the most glare and gives up the most view, so the outside reads as a soft haze rather than a scene. Specify it on hard west glass where the afternoon is genuinely unusable.

3 percent openness: Strong glare control with some view left. It's the choice for a home office facing west or south where screens have to be readable through the afternoon, and it's the one people are usually happiest with on the worst window in the house.

5 percent openness: The everyday middle. It keeps a usable view of a yard or a street while taking the hard edge off direct sun. This is the default we start from on most openings before a specific elevation argues us up or down.

10 percent openness: The most open weave, which means the best view out and the least glare control. It suits a north or east window where you want the fabric mostly for daytime privacy and some sun softening rather than for fighting an afternoon.

Dark fabric colors: Charcoal and bronze absorb light rather than scattering it, so the weave holes read as small clear windows and the view through is noticeably better. The tradeoff is that a dark fabric holds more heat at the glass line.

Light fabric colors: White and beige reflect more solar energy back out and keep the fabric cooler, but they scatter light across the weave, which washes out the view and can produce its own soft glare. It's a real choice, not a color preference.

Reverse roll on solar fabric: Rolling the fabric off the front of the tube stands the screen off the glass by an inch or so, which keeps it clear of hardware and lets a little air move in the space behind it. Useful on hot southern exposures.

Cassette headbox: A closed box hiding the tube, which matters more on solar than on other fabrics because an open roll of screen fabric looks like exactly what it is. It also keeps dust out of the weave sitting on top of the roll.

Motorized with a sun sensor: A motor plus a sensor that lowers the shade when the sun actually hits that elevation, or an astronomical timer that runs to sunrise and sunset. It's the version of this product that works when you aren't home to run it.

Layered with a room darkening shade: A second tube on a dual bracket carrying an opaque fabric behind or in front of the screen. The solar shade handles the afternoon, the second shade handles the night, and neither one gets asked to do a job it can't.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Brownsburg room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Solar Shades FAQ

Questions we hear most often from Brownsburg homeowners considering solar shades.

We usually land on 3 percent there, and sometimes 1 percent on the worst elevation. WindRidge houses run 4,094 to 8,059 square feet with 32 to 55 openings, and the lakefront lots carry fountains, so the glare isn't a steady wash, it moves. A 5 percent mesh handles a still pond well but lets the moving highlights through, and moving glare is what people actually complain about. The cost of dropping to 3 percent is view clarity, which is the reason you bought the lot. We hang samples at the actual window and let you look at the water through each one before writing an order.
No, and this one is recorded rather than a matter of taste. Section 7.2 of the Eagle Crossing Declaration bans 'foil or other reflective material' on any window used 'for sunscreens, blinds, shades, or other purposes'. Metallized and foil backed solar mesh is precisely that, so it's unavailable across Tallgrass and Silverleaf, which is 853 houses built across 2002 and 2003. The practical effect is that your heat rejection has to come from openness factor and fabric color instead of from a reflective backing. On a genuinely bad west elevation we'd move the whole job outside the glass rather than fight that limit from indoors.
None, and this is the single most common misunderstanding in the category. A solar mesh works by contrast: during the day the outside is brighter, so you see out and the person outside sees a screen. After sunset your lamps make the inside brighter and the relationship flips completely, so a 5 percent mesh reads almost transparent from the driveway. On a Lake Ridge lot backing onto the community's stocked lakes and walking trails, that matters at 9pm in July. The fix is a second layer: a room darkening roller behind the mesh, a drapery panel, or a dual system on one bracket.
It slows the process. It doesn't prevent it, and nobody honest will tell you otherwise. NFRC puts ultraviolet at about 40 to 60 percent of fading damage, which leaves visible light and heat responsible for the rest, so a mesh that cuts some of each still lets the process run. On an Ironwood lake lot, where the 1989 to 1992 houses sit on parcels of 14,375 to 16,989 square feet with open water behind them, a 3 percent mesh makes a real difference to how quickly a rug goes. Moving the rug around still does more than any window covering.
They do different jobs and the room usually tells you which. A solar shade keeps the lake in view while cutting glare, which is the point of paying for a Fox Chase or Ironwood lake lot in the first place. A cellular blocks the view entirely and gives you insulation instead, with DOE and Oak Ridge testing showing savings of up to 20 percent of heating energy against a bare window. If the room is where you sit and look at the water, solar. If it's a room used after dark, or one you're heating through a January that averages a 20.9 degree low, cellular.
Dark gives you the better view and the worse heat performance. A charcoal or bronze mesh absorbs light rather than scattering it, so your eye reads through it cleanly and the lake stays a lake. A white or beige mesh reflects more heat outward but scatters light inside the weave, which makes the view hazy and can create its own glare on a bright day. In practice most Brownsburg lake rooms end up with a dark mesh inside and, where the heat load is genuinely the problem, an exterior shade outside the glass doing the thermal work instead.
It's the percentage of the fabric that's open space between the yarns. A 5 percent fabric is 95 percent solid and 5 percent holes. That single number sets the whole tradeoff you're buying, because the holes are what let you see out and the solid part is what cuts the glare. Lower openness means more glare control and less view. Higher openness means more view and less glare control. There's no fabric that gives you both, and anybody who tells you otherwise is selling rather than measuring.
Usually lower than people expect. A west elevation in Brownsburg takes direct low sun through the worst part of a summer afternoon, and a 10 percent fabric there will not cut it. We'd normally be at 3 percent, sometimes 1 percent if the room is a home office where screens have to stay readable. Understand what that costs you: at 3 percent the view out is real but muted, and at 1 percent the outside becomes a soft haze rather than a scene.
Darker, by a clear margin, and it surprises people. A charcoal or bronze yarn absorbs light instead of scattering it, so each opening in the weave behaves like a small clear window and the view through stays crisp. A white or beige fabric scatters light across the weave and washes the view out, sometimes producing a soft glare of its own. The counterweight is heat: a light fabric reflects more solar energy back out through the glass, while a dark fabric holds more at the window.
Yes, and this is the disclosure that saves arguments later. A solar shade works by having more light on one side than the other. During the day it's brighter outside, so you see out and nobody sees in. After dark with your lamps on, that reverses exactly: you see your own reflection and somebody on the sidewalk sees into the room. It's physics, not a fabric flaw. If a room needs nighttime privacy, you need a second fabric on a dual bracket.
They help at the window and they do far less than the marketing suggests. Here's the honest mechanism: by the time an interior shade is doing anything, the sun's energy has already come through the glass and turned into heat inside the room. A screen fabric absorbs and re-radiates some of that, and a light-colored fabric reflects a share back out, so you feel a real difference standing near that window. An exterior product intercepts sun before it gets in, which is a fundamentally better position. That's the difference.
It slows it. NFRC attributes roughly 40 to 60 percent of fading damage to ultraviolet light, with the rest coming from visible light and heat, so no interior fabric ends the problem. Solar screens block a substantial share of UV and cut visible light too, so a hardwood floor or a leather chair in front of south glass ages noticeably slower behind one. What we won't tell you is that a solar shade protects anything completely, because it doesn't, and the fabric only works while it's down.
Reasonably, and it depends on the openness. At 1 or 3 percent, someone standing outside in daylight sees a screen rather than a room, and that's genuine daytime privacy. At 10 percent, a person close to the glass can make out shapes and movement inside. So openness is doing double duty here: it's your glare setting and your daytime privacy setting at once. What it never provides is privacy after dark once the lights are on inside.
Because you'd be paying for a view you then throw away. The whole reason to buy a solar shade instead of a room darkening roller is that you want to keep looking outside while the glare goes away. At 1 percent the outside is a haze, which is right on a brutal west window and wrong on a north window where there was never much glare to fight. Buying openness room by room is how this product earns its price, and it's why we walk elevations before quoting.
Mechanically nothing. A solar shade is a roller shade, same tube, same brackets, same clutch or motor. The difference is entirely the fabric: an open-weave screen designed around a published openness percentage instead of a fabric designed around opacity and appearance. So the decision tree is different. On a roller you're choosing how much light to block. On a solar shade you're choosing how much view to keep while cutting glare, which is a genuinely different question.
They do, and a slider is often the best case for one, since patio glass throws afternoon light across an entire room and you don't want to lose the view of the yard. The things to plan are width and clearance. A wide opening may want two coupled tubes running on one line so they track together, and the hembar has to clear the door handle and the track at the bottom. Reverse roll helps where the fabric would otherwise foul hardware in the opening.
Usually, and the fix is about angle as much as fabric. Screen glare comes from a bright source reflecting off the display, so what matters is cutting the intensity of the light behind and beside you. A 3 percent fabric on the offending window normally does it, and 1 percent handles the worst west exposures. Where it doesn't work is when the sun is low enough to come in under the hembar, which is why we sometimes extend an outside mount lower rather than going tighter on the weave.
Yes, on a dual bracket, and it's the honest answer rather than a way to sell two shades. One bracket carries two tubes at the same opening. The screen handles the afternoon while keeping your view, and an opaque fabric drops at night for real privacy or for sleeping. Trying to get both from a single fabric always disappoints in one direction. The pair needs mounting depth, so we measure for it at the start instead of adding a second shade later.
On a bank of sun-facing windows, it's the version that actually gets used. A sun sensor lowers the shade when that elevation takes sun rather than when you remember, and an astronomical timer runs to sunrise and sunset through the year. Installed motorization sits nationally at $300 to $1,500 per window. Budget for batteries as an ongoing item: Hunter Douglas states PowerView battery life is about one year, and that's the cost people are least often told about before they sign.
Better than most fabrics, since these are engineered for exactly that. Vinyl-coated polyester screens are the workhorse and they hold color and tension for years on a hard exposure. What ages first is usually the edge that sits exposed on the outside of the roll rather than the body of the fabric, and very fine yarn fabrics are less forgiving than coarser ones. Keeping the shade down through the hottest hours protects the room, which is the whole point of owning it.
Areas We Serve

Solar Shades Across Brownsburg

We measure and install in every one of these Brownsburg neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Brownsburg

Brownsburg Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Brownsburg

PVC where the steam is, honest about wide spans

Learn more →

Wood Blinds in Brownsburg

Basswood for rooms with stained casing, never for the wet ones

Learn more →

Vertical Blinds in Brownsburg

The honest answer for a wide slider you use daily

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Brownsburg

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Brownsburg, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 854-7158
Service area

Serving Brownsburg and the surrounding area

Call NowGet Quote